Special Function Ampere Hour Meter

• Display: 4 digit 2 row LED display
• Connectivity: RS232 interface
• Input Type: Serial printer Or with PC Software
• Output Relay: 230 V / 5 A
• Memory Storage: 50,000 logs
• Power Supply: 230 V AC / 110 V AC / 10-30 V DC / 48 V DC
• Dimension: 96 X 96 mm depth 150mm

Model: IM 2511
Ampere Hour Logger IM2511 is a technologically advanced range of ampere-hour meter. It is designed to log with DC Voltage, DC Current, AH count (charge) and/or Watt Hour count (energy). It has two individual displays that are used for showing voltage and current. Furthermore, as per the need, customers can set time interval setting for charging and discharging.

Technical Specifications:

• 4 digit 2 row LED display
• Voltage, current, charge & discharge amp hour count logging
• RS232 interface to connect to PC or to serial printer Or with PC Software
• Log interval settable in hours.min or minute seconds
• Independent log interval in charge and discharge mode
• One relay output rated 230 V / 5 A
• Two setpoints for AH count during discharge mode.
• End Voltage programmable
• Shunt value programmable
• Memory to log around 50,000 logs
• Supply 230 V AC / 110 V AC / 10-30 V DC / 48 V DC
• Panel mount unit size 96X96 mm depth 150mm

• Display: 4 plus 6 digit Display
• Programming Device: Membrane keypad
• Outputs: Three relay outputs
• Shunt Value: 75 mV
• Output Voltage: 0-5 V
• Dimension: 96 X 96 mm
• Power Supply: 230 V AC / 110 V AC / 10-30 V DC / 48 V DC

Model: IM 2508
Ampere Profile Controller IM 2508 is specifically designed to meet the diverse requirements of customers. This is a programmable step profile type device which is used for short circuit monitoring and starting current control. This ampere profile controller IM 2508 is designed to control rectifier during battery formation process. It can be used as a reference for rectifier to determine set point as it has DC voltage output.

Technical Specifications

• 4 plus 6 digit Display
• Membrane keypad for programming
• Three relay outputs
• Shunt value programmable at 75 mV
• Memory retention in case of power failure
• Start current, bar charging time, Short circuit time programmable
• 0-5 V Output for current control
• Size 96X96 mm depth 150 mm
• Supply 230 V AC / 110 V AC / 10-30 V DC / 48 V DC

• Usage: Industrial
• Digit: 4 digit 12.5 mm led display
• Colour: Red
• Output Relay: 230 V / 5 A
• Shunt Value: 75mV
• Power Supply: 230 V AC / 110 V AC / 10-30 V DC / 48 V DC

Model: IM 2512
Current Limit Ampere Hour Meter IM2512 is a 4 digit ampere-hour meter. It is used to measure the flow of current as it found applications in battery charging and discharging. It is specially designed to lower the flow of current when the battery is charged sufficiently.

Technical Specifications:

• 4 digit 12.5 mm red led display
• Membrane keypad
• One set point with relay output rated 230 V / 5 A (resistive)
• Ampere Hour / Ampere Minute selection
• Shunt value programmable at 75mV
• Current limit value programmable
• External Reset facility
• Size 96X96 mm depth 150 mm
• Supply 230 V AC / 110 V AC / 10-30 V DC / 48 V DC

• Display: 4 digit 12.5 mm display
• Totalizer Display: 6 digit 8 mm
• Output Relay: 230 V / 5 A (resistive)
• Size: 96 X 96 mm
• Power: 230 V AC / 110 V AC / 10-30 V DC / 48 V DC

Model : IM 2509
Ampere Hour Meter With three Doser IM2509 is a new model of ampere-hour meter which has improved with three control relay outputs. This ampere-hour meter with 3 dose IM2509 is used to facilitate the addition of three chemicals. Our product is available in with 4 digit display option and designed specifically to meet the diverse client’s requirements

Technical Specifications:

• 4 digit 12.5 mm display for Ampere Hour
• 6 digit 8 mm display for Totalizer
• One set point with relay output rated 230 V / 5 A (resistive)
• Three relay outputs for dose control which operate on totalizer count
• Ampere Hour / Ampere Minute selection
• Shunt value programmable at 75mV
• Battery backup to retain count in case of power failure.
• External Reset facility
• Need password protection to avoid third-party use
• Size 96X96 mm depth 150 mm
• Supply 230 V AC / 110 V AC / 10-30 V DC / 48 V DC

• Display Digit: 6 digit display
• AH Resolution : Multiply by 100
• Supply Voltage: 90-270 V AC
• Resolution: 1 Ampere Hour / Ampere minute
• Shunt Value: 75 mV

Model: IM 2513
Central Ampere Hour Controller IM2513 is a well-suited model for the plants where different jobs are carried out by using individual rectifiers in the same bath. It is a master controller which can be connected to multiple ampere hour meters and can connect up to 8 AH meters.

Technical Specifications:

• 6 digit display for Total Ampere Hour
• AH Resolution as multiply by 100
• Provision of a relay output which activates after a preset count for preset time interval
• Battery back up to retain Ampere Hour count
• Dustproof Membrane keyboard for easy programming

• Usage: Industrial
• Resolution: 0.1
• Option: AMP MIN / AMP HOUR / AMP SEC Display.
• No of Display: 2 (ampere hour, current hour)

Model: IM 2514
This Ampere Hour Second Meter IM2514 is an advanced model of any ampere any hour meter. The user can choose three different modes of action as per the need. They could select ampere-hour meter, ampere minute meter or ampere second meter. It has only one set point and a relay output to control external rectifier.

Technical Specifications:

• Dual displays for Current and Ampere Hour
• It has facility to program shunt values
• Floating decimal point provides resolution of 0.1
• Provision of a relay output which activates after a preset count
• Battery back up to retain Ampere Hour count and totaliser count in case of power failure
• Facility to select AMP MIN / AMP HOUR / AMP SEC Display
• Dustproof Membrane keyboard for easy programming